Description
Carli Pintop 3.25" Leveling System: 2013+ Ram 3500 Auto-Level Air, Dually Compatible
This Carli Suspension Pintop system is built for Ram 3500 owners with factory auto-leveling rear air suspension who need serious capacity without giving up ride quality or handling. Its King 2.5" remote reservoir shocks are tuned specifically for the air-assist Ram 3500. Carli tested it on both single-rear-wheel and dually (DRW) trucks.
At a Glance
| Front lift | 3"-3.5" (depends on cab configuration) |
| Dually (DRW) | ✔ Compatible (confirmed by Carli) |
| Shocks | Carli-tuned, ALAS-specific King 2.5" remote reservoir, 17-4 stainless shafts |
| Front springs | Carli linear-rate coils, taller and lighter rate |
| Travel | About 50% more suspension travel than stock |
| Rear | Shocks tuned to work with Carli's progressive leaf springs, sold separately |
| Warranty | Limited lifetime |
What's in the Box
| Part # | Component |
|---|---|
| CS-DFBD-1 | Front bump drops |
| CS-DLRC-14-D | Front linear-rate coil springs |
| CS-DATB-1419 | Front adjustable track bar |
| CS-DRAD-14 | Radius arm drops |
| CS-DCM-20-HK | Transmission crossmember, extended hardware kit |
| CS-DPT25SPKG-13-D-ALAS | Carli-tuned, ALAS-specific King 2.5" remote reservoir shock package with reservoir mounts and stainless shafts |
Optional upgrades are available. Call us to configure.
Why This Kit
- Tuned for air-assist Rams: Shock valving is specific to the auto-leveling air suspension Ram 3500.
- King 2.5" shocks: Carli designed a custom piston for heavy-duty trucks and tuned the shocks around it. Stainless shafts have no coating to wear off, and King oil is good to -55°F.
- More travel: Taller, lighter-rate coils give about 50% more travel than the factory setup.
- Corrected geometry: Three inches of lift pulls the axle toward the driver's side. The adjustable track bar pushes it back, and radius arm drops recenter caster and shift the axle to its new center of travel.
- Sway bar: The factory sway bar needs relocating with the added travel. Carli offers Billet Sway Bar Drop Brackets or a Torsion Sway Bar (sold separately).
Dually (DRW) Note
Carli says fitment is the same for single-rear-wheel and dually trucks. On a dually, plan on up to a 35" tire with wheels near stock backspacing. Carli suggests a 17"-18" wheel, a slightly wider wheel for a 12.5"-wide tire, and keeping the offset close to stock so the rear track stays narrow. For a 35" E-rated tire unloaded, Carli runs about 45 psi front and 30 psi rear.
Fitment
- 2013+ Ram 3500, Diesel, 4WD, with factory auto-leveling rear air suspension
- Single-rear-wheel and dually (DRW)
- Not recommended with any lift system other than Carli's Ram 3500 air-ride kit
- Requires a sway bar option (sold separately)
Not sure it fits your truck? Call our dually specialists at 888-505-0987.