4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks for 2020+ Silverado/Sierra 3500 2WD/4WD Cognito

4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks for 2020+ Silverado/Sierra 3500 2WD/4WD Cognito

$7,523.44
Skip to product information
4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks for 2020+ Silverado/Sierra 3500 2WD/4WD Cognito

Brand: Cognito Motorsports

4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks for 2020+ Silverado/Sierra 3500 2WD/4WD Cognito

Chevrolet Silverado 3500 Dually · GMC Sierra 3500 Dually
SKU: 510-P1179
Fits your
This does not fit your See wheels that fit your
Enter your vehicle to check fitment
Fitment data not available
In Stock
$7,523.44

View store information

4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks for 2020+ Silverado/Sierra 3500 2WD/4WD Cognito

Ships free to the lower 48 on a 500 lb freight pallet. We confirm fitment against your truck before it leaves the warehouse.
Free mount & balanceOn every package
Free freightLower 48
Fitment checkedBefore we ship
30-day returnsUnmounted
Talk to a dually expert(888) 505-0987
Fits these vehicles
Years Vehicle
2020–2027 Chevrolet Silverado 3500 Dually
2020–2027 GMC Sierra 3500 Dually
Free mount & balanceEvery wheel & tire package
Fitment confirmed by a humanBefore the pallet leaves
The deepest dually catalogOver 7,000 wheels, tires, and packages
Financing availableAffirm & Shop Pay
30-day returnsUnmounted

Description

Cognito 4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks: 2020+ Chevrolet Silverado 3500 and GMC Sierra 3500 2WD/4WD, Dually Compatible

This kit lifts your 3500 4" up front and 2" in the rear with one part number. Every Cognito component is engineered, made and assembled in the USA. King 2.5 reservoir shocks with compression adjusters at all four corners keep the ride controlled. It fits single-rear-wheel and dually (DRW) Silverado 3500 and Sierra 3500 trucks.

At a Glance

Front lift 4"
Rear lift 2" (Cognito block and U-bolt kit)
Dually (DRW) ✔ Compatible
Shocks King 2.5 remote reservoir (front) and piggyback reservoir (rear), with compression adjusters
Max tire size 37x12.50 on a 9" wide wheel with 5.5" backspacing
Install time About 14 hours
Made in USA

What's in the Box

Qty Part # Component
1 110-70120 4" sub-frame component box
1 110-70121 4" front spindle kit
1 110-70122 4" non-torsion-bar-drop components kit
1 110-70123 4" differential mount kit
1 110-90772 Forged Pitman and idler arm support kit
1 110-90897 2" cast rear lift blocks with 17.5" U-bolts
1 510-91069 King 2.5 remote reservoir front shock kit
1 510-91070 King 2.5 piggyback reservoir rear shock kit
1 80000 SM Series ball joint upper control arm, driver side
1 80001 SM Series ball joint upper control arm, passenger side

Why This Kit

  • Corrected geometry: New spindles, subframe and differential mounts keep proper angles and add droop travel for a better ride.
  • SM Series upper control arms: Boxed, welded arms with pre-installed maintenance-free ball joints and pivot bushings correct the ball joint angle.
  • Steering support: Cognito's patented Pitman and Idler Arm Support Kit stops the center link from moving forward and back.
  • King 2.5 reservoir shocks: Large 2.5" bodies and external reservoirs add fluid capacity and shed heat, and the valving is serviceable with hand tools.
  • Complete kit: Matched shocks, blocks and U-bolts are included, so there's no guesswork.

Fitment

  • 2020+ Chevrolet Silverado 3500 and GMC Sierra 3500, 2WD and 4WD
  • Single-rear-wheel and dually (DRW)
  • The truck must not already be lifted or leveled. This kit can't be combined with leveling kits or shock spacers, and only the supplied shocks can be used.
  • Not for trucks equipped with GM Super Cruise
  • Install requires cutting factory frame and suspension parts; front bumper trim may need trimming depending on tire size; alignment required afterward

Not sure it fits your truck? Call our dually specialists at 888-505-0987.

Specifications

BrandCognito Motorsports
Part number510-P1179
Shipping weight500 lb

Reviews

You may also like