Description
Cognito 4-Inch Elite Lift Kit with King 2.5 Reservoir Shocks: 2020+ Chevrolet Silverado 3500 and GMC Sierra 3500 2WD/4WD, Dually Compatible
This kit lifts your 3500 4" up front and 2" in the rear with one part number. Every Cognito component is engineered, made and assembled in the USA. King 2.5 reservoir shocks with compression adjusters at all four corners keep the ride controlled. It fits single-rear-wheel and dually (DRW) Silverado 3500 and Sierra 3500 trucks.
At a Glance
| Front lift | 4" |
| Rear lift | 2" (Cognito block and U-bolt kit) |
| Dually (DRW) | ✔ Compatible |
| Shocks | King 2.5 remote reservoir (front) and piggyback reservoir (rear), with compression adjusters |
| Max tire size | 37x12.50 on a 9" wide wheel with 5.5" backspacing |
| Install time | About 14 hours |
| Made in | USA |
What's in the Box
| Qty | Part # | Component |
|---|---|---|
| 1 | 110-70120 | 4" sub-frame component box |
| 1 | 110-70121 | 4" front spindle kit |
| 1 | 110-70122 | 4" non-torsion-bar-drop components kit |
| 1 | 110-70123 | 4" differential mount kit |
| 1 | 110-90772 | Forged Pitman and idler arm support kit |
| 1 | 110-90897 | 2" cast rear lift blocks with 17.5" U-bolts |
| 1 | 510-91069 | King 2.5 remote reservoir front shock kit |
| 1 | 510-91070 | King 2.5 piggyback reservoir rear shock kit |
| 1 | 80000 | SM Series ball joint upper control arm, driver side |
| 1 | 80001 | SM Series ball joint upper control arm, passenger side |
Why This Kit
- Corrected geometry: New spindles, subframe and differential mounts keep proper angles and add droop travel for a better ride.
- SM Series upper control arms: Boxed, welded arms with pre-installed maintenance-free ball joints and pivot bushings correct the ball joint angle.
- Steering support: Cognito's patented Pitman and Idler Arm Support Kit stops the center link from moving forward and back.
- King 2.5 reservoir shocks: Large 2.5" bodies and external reservoirs add fluid capacity and shed heat, and the valving is serviceable with hand tools.
- Complete kit: Matched shocks, blocks and U-bolts are included, so there's no guesswork.
Fitment
- 2020+ Chevrolet Silverado 3500 and GMC Sierra 3500, 2WD and 4WD
- Single-rear-wheel and dually (DRW)
- The truck must not already be lifted or leveled. This kit can't be combined with leveling kits or shock spacers, and only the supplied shocks can be used.
- Not for trucks equipped with GM Super Cruise
- Install requires cutting factory frame and suspension parts; front bumper trim may need trimming depending on tire size; alignment required afterward
Not sure it fits your truck? Call our dually specialists at 888-505-0987.
Specifications
BrandCognito Motorsports
Part number510-P1179
Shipping weight500 lb