Description
Carli Unchained 3.5 3" Lift System: 2012 Ram 3500 Diesel, Dually Compatible
The Carli Suspension Unchained 3.5 is a no-compromise off-road system with a long arm conversion, massive King 3.5" front shocks and King 3.0" 4-tube bypass rear shocks. It rides a bit stiffer on the road than Carli's other high-end systems, but still much better than stock. It fits single-rear-wheel and dually (DRW) Ram 3500s.
At a Glance
| Front lift | 3"-3.25" (depends on year and cab configuration) |
| Dually (DRW) | ✔ Compatible |
| Shocks | Carli-tuned King 3.5" remote reservoir front (11.25" travel), King 3.0" 4-tube bypass rear, 17-4 stainless shafts, limit straps |
| Control arms | Fabricated long arm system, over 50% longer than factory, 3/16" steel with internal gusseting |
| Travel | About 70% more suspension travel than stock; front spec'd at 6" up and 5.25" down |
| Max tire size | Up to 37" |
| Required options | Carli Torsion Sway Bar and Full Progressive Leaf Springs, sold separately |
| Warranty | Limited lifetime |
What's in the Box
| Part # | Component |
|---|---|
| CS-DLRC-10-D | Linear-rate coil springs |
| CS-DLA3-10 | Long arm system |
| CS-DATB-03 | Adjustable track bar |
| CS-DUC35SPKG-03-D-LA | Unchained 3.5 shock package with stainless shafts, limit straps and reservoir mounts |
| CS-DFST625 | Fabricated 6.25" shock towers |
| CS-DRSMKIT-03 | Fabricated rear shock mounts |
| CS-DFBD-1 | 1" front bump drops |
| CS-D3BBL-12 | Braided brake lines |
| CS-D30GUSSET | Rear gusset kit |
| CS-HOLESAWKIT-4.5 | 4" hole saw and arbor |
Optional upgrades are available. Call us to configure.
Why This Kit
- Long arm geometry: Longer arms sitting parallel to the ground give a more linear travel stroke and a better ride than short arms.
- King 3.5" front shocks: Carli-tuned with an off-road oriented, long-arm tune. They're so large the factory spring buckets are bored for clearance (hole saw included).
- Tunable rear bypass: King 3.0" 4-tube bypass shocks resist bottoming far better than smooth-body shocks, and you can adjust the tubes to get exactly the rear ride you want.
- Balanced travel: The 6.25" shock tower and 1" bump drops shift the axle's range down, adding 2.25" of down-travel over a short-arm setup. Limit straps protect the shocks.
- Built to take abuse: Fabricated rear shock mounts replace a known weak point in the factory mounts.
Fitment
- Ram 3500, Diesel, 4WD, 2012 model year (Ram 3500 coverage ends with 2012)
- Single-rear-wheel and dually (DRW)
- Requires the Carli Torsion Sway Bar and Full Progressive Leaf Springs (sold separately); no end-link or Add-a-Pack option
- Install requires cutting off the factory control arm mounts
- Carli recommends a roll cage at this level of suspension
Not sure it fits your truck? Call our dually specialists at 888-505-0987.
Specifications
BrandCarli Suspension
Part numberCS-DUC35-12-D
Shipping weight450 lb