Description
Cognito 4-Inch Standard Lift Kit with Fox 2.0 IFP Shocks: 2001-2010 Chevrolet Silverado 3500 and GMC Sierra 3500 2WD/4WD, Dually Compatible
This kit lifts your Silverado or Sierra 3500 4" in front and 2" in the rear with one part number. Every Cognito component is engineered, made and assembled in the USA. It's paired with Fox 2.0 shocks sized for this lift, so you keep at least 3" of droop travel for a good ride. It fits single-rear-wheel and dually (DRW) 3500 trucks.
At a Glance
| Front lift | 4" |
| Rear lift | 2" (block and U-bolt kit) |
| Dually (DRW) | ✔ Compatible |
| Shocks | Fox 2.0 Performance Series IFP monotube, front and rear |
| Suggested tire size | 33" tall, up to 12.5" wide on an 8"-9" wide wheel with 4.25"-5.0" backspacing (max wheel backspacing 5.5") |
| Install time | About 10 hours |
| Made in | USA |
What's in the Box
| Qty | Part # | Component |
|---|---|---|
| 1 | 110-70005 | 4WD component box (differential drop mounts, front axle spacers) |
| 1 | 110-70006 | Non-torsion-bar drop component box (drop brackets, bump stop brackets) |
| 1 | 110-70007 | Sub-frame component box (front and rear crossmembers, skid plate) |
| 1 | 110-70118 | Spindle component box (lifted spindles, sway bar end links, hardware) |
| 1 | 110-90796 | 2" rear blocks with 13.6" U-bolts |
| 2 | 210-90206 | Fox 2.0 Performance Series shocks, front |
| 2 | 210-90207 | Fox 2.0 Performance Series shocks, rear |
Why This Kit
- Corrected geometry: The non-torsion-bar-drop front system is engineered for correct CV joint angles and a good ride.
- Level stance: 4" up front and 2" in the rear keeps the truck's stance balanced.
- Ride quality: The kit keeps a minimum of 3" of droop travel.
- Fox 2.0 IFP shocks: Rust-resistant aluminum-body monotubes with an internal floating piston that prevents oil aeration, at all four corners.
- Complete kit: Sub-frame, spindles, brackets, rear blocks and four shocks under one part number.
Fitment
- 2001-2010 Chevrolet Silverado 3500 and GMC Sierra 3500, 2WD and 4WD (the differential drop parts are used on 4WD only)
- Single-rear-wheel and dually (DRW)
- Some cutting and drilling of factory frame and suspension parts is required. Exhaust or driveline modification may be needed.
- Front-end alignment required after installation
Not sure it fits your truck? Call our dually specialists at 888-505-0987.
Specifications
BrandCognito Motorsports
Part number110-P0785
Shipping weight210 lb