Dominator 3.0 System Base 6 Lift 2010-11 RAM 3500 Diesel Carli Suspension

Dominator 3.0 System Base 6 Lift 2010-11 RAM 3500 Diesel Carli Suspension

$15,740.63
Skip to product information
Dominator 3.0 System Base 6 Lift 2010-11 RAM 3500 Diesel Carli Suspension

Brand: Carli Suspension

Dominator 3.0 System Base 6 Lift 2010-11 RAM 3500 Diesel Carli Suspension

Dodge RAM 3500 Dually
SKU: CS-DD30-6-10-D
Fits your
This does not fit your See wheels that fit your
Enter your vehicle to check fitment
Fitment data not available
In Stock
$15,740.63

View store information

Dominator 3.0 System Base 6 Lift 2010-11 RAM 3500 Diesel Carli Suspension

Ships free to the lower 48 on a 461 lb freight pallet. We confirm fitment against your truck before it leaves the warehouse.
Free mount & balanceOn every package
Free freightLower 48
Fitment checkedBefore we ship
30-day returnsUnmounted
Talk to a dually expert(888) 505-0987
Fits these vehicles
Years Vehicle
2010–2011 Dodge RAM 3500 Dually
Free mount & balanceEvery wheel & tire package
Fitment confirmed by a humanBefore the pallet leaves
The deepest dually catalogOver 7,000 wheels, tires, and packages
Financing availableAffirm & Shop Pay
30-day returnsUnmounted

Description

Carli Dominator 3.0 6" Lift System: 2010-2011 Ram 3500 Diesel, Dually Compatible

The Carli Suspension 6" Dominator pairs Carli-tuned King 3.0" remote reservoir shocks with a full radius arm conversion and a one-piece, internally gusseted crossmember. It is Carli's best balance of on-road comfort and off-road capability at this height. It fits single-rear-wheel and dually (DRW) Ram 3500s.

At a Glance

Front lift 6"
Dually (DRW) ✔ Compatible
Shocks Carli-tuned King 3.0" remote reservoir, 17-4 stainless shafts, limit straps
Wheel travel 12" front, 12.5" rear (about 60% more than stock)
Max tire size 37" on wheels no more than 9" wide with 4.5" backspacing
Required options Rear leaf spring option and sway bar option, sold separately
Install note Rear shock gusset requires welding
Warranty Limited lifetime

What's in the Box

Part # Component
CS-DMRC6-03-D Multi-rate coil springs
CS-DATB-03 Adjustable track bar
CS-DPRBDROP-6 Track bar drop bracket
CS-DRA6-10-L Radius arm system with long crossmember
CS-DD30SPKG-6-03-D Dominator King 3.0" shocks with stainless shafts, short reservoir mounts and limit straps
CS-DFST475 Fabricated shock towers
CS-DRBD-6 Rear bump stop drops
CS-DFBD-6 Front bump stop drops
CS-D6BBL-03 Brake lines
CS-HOLESAWKIT-4.5 4" hole saw and arbor
CS-D30GUSSET Rear shock gusset kit

Optional upgrades are available. Call us to configure.

Why This Kit

  • Radius arm conversion: Longer, flatter links cycle more linear travel than extended short arms. Carli arms use internal X-bracing, 3" Currie Johnny Joints and a one-piece gusseted crossmember, and they let the axle roll so it doesn't bind during articulation.
  • Returns to stock: The radius arm drop brackets bolt on with no modification to the factory control arm brackets.
  • King 3.0" shocks: Custom Carli pistons and tuning, with shafts machined from solid 17-4 stainless. Carli recommends wrapping the plated steel bodies if the truck sees extended bad weather.
  • Rear setup: Carli's Full Progressive Leaf Pack (sold separately) lifts the rear 4" with no block. It trades some payload for ride quality; Long Travel Airbags (sold separately) restore factory capacity.
  • Driveline tip: Carli recommends a carrier bearing drop bracket for trucks with a two-piece driveshaft.

Fitment

  • 2010-2011 Ram 3500, Diesel, 4WD
  • Single-rear-wheel and dually (DRW)
  • Requires a rear leaf spring option and a sway bar option (sold separately)
  • Rear shock gusset must be welded in

Not sure it fits your truck? Call our dually specialists at 888-505-0987.

Specifications

BrandCarli Suspension
Part numberCS-DD30-6-10-D
Shipping weight461 lb

Reviews

You may also like