Description
Cognito 6-Inch Standard Lift Kit with Fox 2.0 IFP Shocks: 2001-2010 Chevrolet Silverado 3500 and GMC Sierra 3500 2WD/4WD, Dually Compatible
This kit lifts your Silverado or Sierra 3500 6" in front and 4" in the rear and levels it front to rear with one part number. Every Cognito component is engineered, made and assembled in the USA. It includes Cognito SM Series upper control arms and Fox 2.0 shocks at all four corners for added droop travel and a good ride. It fits single-rear-wheel and dually (DRW) 3500 trucks.
At a Glance
| Front lift | 6" |
| Rear lift | 4" (block and U-bolt kit) |
| Dually (DRW) | ✔ Compatible |
| Shocks | Fox 2.0 Performance Series IFP monotube, front and rear |
| Suggested tire size | 34.5" tall, up to 12.4" wide on an 8"-8.5" wide wheel with 5.0"-5.5" backspacing |
| Install time | About 12 hours |
| Made in | USA |
What's in the Box
| Qty | Part # | Component |
|---|---|---|
| 1 | 110-70007 | Sub-frame component box (front and rear crossmembers, skid plate) |
| 1 | 110-70118 | Spindle component box (lifted spindles, sway bar end links, hardware) |
| 1 | 110-70005 | 4WD component box (differential drop mounts, front axle spacers) |
| 1 | 110-70006 | Non-torsion-bar drop component box (drop brackets, bump stop brackets) |
| 1 | 110-90167 | 4" rear blocks with 16" U-bolts |
| 2 | 210-90206 | Fox 2.0 Performance Series shocks, front |
| 2 | 210-90207 | Fox 2.0 Performance Series shocks, rear |
| 1 | 110-90269 | Torsion bar adjuster keys |
| 1 | 110-90290 | SM Series ball joint upper control arm kit (arms, ball joints, bushings) |
Why This Kit
- Corrected geometry: The non-torsion-bar-drop front system is engineered for correct CV joint angles, and the SM Series upper arms correct the ball joint angle.
- Level stance: 6" up front and 4" in the rear levels the truck front to rear.
- Ride quality: The upper arms and torsion keys keep adequate droop travel for a better ride.
- Fox 2.0 IFP shocks: Fox Performance Series monotubes at all four corners for a comfortable on-road ride and predictable off-road handling.
- Complete kit: Sub-frame, spindles, control arms, keys, rear blocks and four shocks under one part number.
Fitment
- 2001-2010 Chevrolet Silverado 3500 and GMC Sierra 3500, 2WD and 4WD (the differential drop parts are used on 4WD only)
- Single-rear-wheel and dually (DRW)
- Some cutting and drilling of factory frame and suspension parts is required. Exhaust or driveline modification may be needed.
- Maximum wheel backspacing is 5.5". Front-end alignment required after installation.
Not sure it fits your truck? Call our dually specialists at 888-505-0987.
Specifications
BrandCognito Motorsports
Part number110-P0970
Shipping weight337 lb