Description
Cognito 12-Inch Performance Lift Kit with Fox 2.0 PSRR Shocks: 2011-2019 Chevrolet Silverado 3500 and GMC Sierra 3500 2WD/4WD, Dually Compatible
This kit lifts your Silverado or Sierra 3500 12" in front and 9" in the rear and levels it front to rear, all under one part number. Every Cognito component is engineered, made and assembled in the USA. It includes SM Series upper control arms, forged torsion bar keys, the Pitman and Idler Arm Support Kit, Deaver rear leaf packs, an HD front sway bar and Fox 2.0 remote reservoir shocks at all four corners. It fits single-rear-wheel and dually (DRW) 3500 trucks.
At a Glance
| Front lift | 12" |
| Rear lift | 9" (Deaver 4" leaf packs plus 5" blocks), levels the truck front to rear |
| Dually (DRW) | ✔ Compatible (see the dually note below) |
| Shocks | Fox 2.0 Performance Series remote reservoir (PSRR), front and rear |
| Brake lines | Extended stainless steel front and rear brake lines included |
| Install time | About 17 hours |
| Made in | USA |
What's in the Box
| Qty | Part # | Component |
|---|---|---|
| 1 | 110-70052 | 10"/12" sub-frame component box (crossmembers, sub-frame connectors, compression struts) |
| 1 | 110-70053 | 10"/12" spindle component box |
| 1 | 110-70054 | 10"/12" skid plate and torsion drop component box (skid plate, torsion bar drop brackets, pitman and idler arm support kit, wheel speed sensor extenders, sway bar end links, e-brake cable extension) |
| 1 | 110-70055 | 10"/12" 4WD component box (differential mounts, axle spacers) |
| 1 | 110-70070 | Front brake line kit |
| 1 | 110-70071 | Rear brake line kit |
| 1 | 110-90186 | 5" rear blocks with 17.5" U-bolts |
| 1 | 110-90258 | 0.5" front shock extender kit |
| 1 | 110-90270 | Torsion bar adjuster keys |
| 1 | 110-91071 | SM Series ball joint upper control arm kit (arms, ball joints, bushings) |
| 2 | 210-90213 | Fox 2.0 Performance Series remote reservoir shocks, front |
| 2 | 210-90218 | Fox 2.0 Performance Series remote reservoir shocks, rear |
| 2 | 90238 | Deaver 4" rear leaf spring packs |
| 1 | 210-90262 | HD front sway bar kit |
Why This Kit
- Corrected geometry: The front lift is engineered for correct CV joint angles, and SM Series upper arms correct the ball joint angle.
- Steadier steering: Cognito's patented PISK supports the pitman and idler arms and stops the center link from moving forward and back.
- Rear ride quality: Deaver leaf packs fully replace the factory springs. They use more, thinner leaves for a more compliant ride.
- Body control: The 1.5" HD front sway bar is heat-treated 4140 chromoly with larger clamps and polyurethane bushings to cut body roll.
- Fox 2.0 PSRR shocks: Rust-resistant aluminum-body reservoir shocks with factory-tuned valving on all four corners.
Dually (DRW) Note
Cognito notes that dually trucks may need a spacer between the rear tires. Our team can help you sort out wheel and spacer fitment.
Fitment
- 2011-2019 Chevrolet Silverado 3500 and GMC Sierra 3500, 2WD and 4WD (the differential parts are used on 4WD only)
- Single-rear-wheel and dually (DRW)
- 4WD trucks: a CV front driveline is required if you drive in 4WD above 20 mph
- Includes wheel speed sensor extenders for StabiliTrak-equipped trucks
- The truck must not already be lifted or leveled. This kit can't be combined with other leveling kits or shock spacers, and only the included shocks can be used.
- Some cutting of factory frame and suspension parts is required. Fender and front bumper valance trimming may be needed with wider wheels and tires. Front-end alignment required after installation.
Not sure it fits your truck? Call our dually specialists at 888-505-0987.